June 2026
Operations start in Canada
RETRAK Canada begins supplying corrugated PolyAl sheet and spray cork to Canadian customers.
RETRAK Canada · Manufacturer
Recycled PolyAl sheet, panel and coating
Corrugated PolyAl sheet, stone composite panels and spray cork — manufactured in our own press plant, specified to published tolerances and delivered across Canada.
- 0.80 lb/ft²
- Corrugated sheet, 1/8 in
- 65 lb/ft³
- Density, ASTM D792
- < 0.5%
- Water absorption, 24 h
- 30+ yrs
- Expected service life
Product range
Three systems from one feedstock
Sheeting & Cladding
Corrugated PolyAl Sheets
- Sold by
- sheet
- Availability
- In stock — ships in 5 business days
Facade & Cladding
Stone Composite Panels
- Sold by
- panel
- Availability
- Pending market launch
Coatings
Spray Cork
- Sold by
- pail
- Availability
- In stock — ships in 5 business days
Contractors
Sheet weights, fastener schedules, lap details and pallet quantities. Order online with freight quoted to the site.
Product specs and pricing →Specifiers & engineers
Data sheets, test evidence, tolerances and the certification roadmap with current status on each standard.
Product data and pricing →Distributors
Territory appointments, container pricing, stocking programs and marketing support for building-material dealers.
Distributor program →Performance
Why the material behaves the way it does
Freeze-thaw stable
50 freeze-thaw cycles with no cracking, swelling or delamination.
Corrosion free
No rust, no galvanic reaction at fasteners, no coating film to chalk or peel. Colour runs through the full thickness.
100% recovered feedstock
Pressed from post-consumer PolyAl. No virgin resin, no binders, no solvents, no firing step.
Standard site tooling
Cut with a fine-tooth carbide blade, fix with coated screws and EPDM washers. No proprietary tools or fabrication.
Low embodied energy
Consolidation at 330 °F — far below ceramic firing or metal smelting temperatures.
Canada-wide freight
Calgary warehouse stock. LTL and full-load quotes to every province.
Manufacturing
Pressed, not compounded with virgin resin
Recovered PolyAl is shredded to 5/16–9/16 in flake, washed, dried below 0.8% moisture and consolidated in a heated press at 330 °F and 610 psi. The polyethylene fraction re-melts around the aluminium and forms a homogeneous board — no binder, no solvent, no firing.
- 330 °F
- platen temperature
- 610 psi
- specific pressure
- ± 0.012 in
- thickness tolerance
Company updates